ABB | SACE Emax 2
LEAP analysis program | 2 - Leap offers301 | © 2017 ABB | 1SDH001330R0002 - ECN000058721 Rev. A
LEAP Audit
LEAP AUDIT is an analysis carried out by ABB personnel to show the real aging of the circuit-breaker.
Procedure
ABB personnel downloads the historical data present in the electronic trip unit of the circuit-breaker using
Ekip Connect software and provides them to the LEAP algorithm.
Report
By combining the historical data with the environmental and usage data of the circuit-breaker, the LEAP
algorithm produces a report, sent via e-mail to the customer, that shows the real state of the circuit-breaker
and any maintenance actions that need to be undertaken.
Example of real analysis:
LEAP Stand Alone
LEAP STAND ALONE is an analysis carried out by an ABB specialist technician to show the real state of aging
of the circuit-breaker and the effectiveness of the maintenance carried out.
Procedure
The customer requests a maintenance intervention from ABB.
In addition to the information downloaded from the trip unit of the circuit-breaker via the Ekip Connect
software, the ABB technician also inserts environmental and usage conditions and maintenance actions
carried out. The resulting LEAP report provides a graphical representation of the state of health of the circuit-
breaker before and after the intervention of the ABB technician.
Report
The report, sent to the customer for e-mail, is completed with information on the installation conditions of the
circuit-breaker and on maintenance activities carried out, and it suggests the frequency of maintenance and
future maintenance actions.
Example of LEAP Stand Alone:
To Next Page
Loading...
Need help?
General
