KNX control elements and application parameters
Control "Split Unit Control"
Product manual 2CKA00xx73xxxxx
153
10.10.13 Fan speed levels
Options: 1
2
3
4
5
The parameter is used to set the fan speed level.
10.10.14 Value for the speed x
Options: Setting option from 0 to 255
The parameter is used to set the value for the fan speed.
10.10.15 Using automatic fan speed control
Options: deactivated
activated
The use of the automatic fan speed control is activated via the parameter.
10.10.16 Value for automatic fan speed x
Options: Setting option from 0 to 255
The value of the automatic fan speed control is set via the parameter.
To Next Page
Need help?
General
