KNX control elements and application parameters
"Scene" control element
Product manual 2CKA00xx73xxxxx
157
10.11.6 Scene number x [1 - 64]
Options: Setting option from 1 - 64
The parameter is used to specify which scenes are to be started.
Notice
How many "Scene number x [1 - 64]" parameters are available depends on
the setting of the "Number of scenes [1 - 10]" parameter.
10.11.7 Name of scene x
Options: <Name>
Designation of scene. The length of the name is limited to 60 characters.
Notice
How many "Name of scene x" parameters are available depends on the
setting of the "Number of scenes [1 - 10]" parameter.
10.11.8 Saving scene x with a long press
Options: Deactivated
Activated
The parameter is used to specify whether the scene x can be saved only with a long press of
the button. Adjustment of the button pressure, see parameter "Long operation after...".
Notice
How many "Save scene x with a long press" parameters are available
depends on the setting of the "Number of scenes [1 - 10]" parameter.
10.11.9 Enable 1-bit communication object "Disable"
Options: Deactivated
Activated
There is the option of temporarily disabling the function via an additional communication object
"Disable".
To Next Page
Loading...
Need help?
General
