Name: ABB SmartTouch i-bus KNX
Brand: ABB
Rating: 4 (1 reviews)

To Next Page

To Previous Page

KNX control elements and application parameters

Control element "Audio control"

Product manual 2CKA00xx73xxxxx

│

184

10.16.7 Trigger with

Options: 1

1 and 0

The parameter is used to specify the signal for the trigger.

10.16.8 Enable 1-bit communication object "Disable"

Options: Disabled

Activated

There is the option of temporarily disabling the function via an additional communication object

"Disable".



Table of Contents2
Notes on the Instruction Manual13
Safety14
Information and Symbols Used14
Intended Use15
Improper Use15
Target Group / Qualifications of Personnel16
Operation16
Installation, Commissioning and Maintenance16
Cyber Security17
Ports and Services for Supporting the Main Functionality19
Safety Instructions21
Information on Protection of the Environment22
Environment22
Product Overview23
Scope of Supply25
Additional Necessary Components25
Overview of Types25
Overview of KNX Functions26
Device Overview26
Technical Data28
Dimensional Drawings29
Circuit Diagrams30
Connection, Installation / Mounting31
Planning Instructions31
Safety Instructions31
Requirements for the Electrician31
Preparatory Steps32
Mounting / Dismantling33
Installation Sites33
Mounting34
Mounting in Flush-Mounted Installation Box in Solid Wall35
Mounting in Flush-Mounted Installation Box in Hollow Wall36
Mounting with Surface-Mounted Mounting Frame37
Electrical Connection38
Connection, Installation and Addressing38
External Power Supply39
Installation39
Dismantling40
Initial Commissioning of Device41
Initial Commissioning with ABB-Free@Home43
Commissioning of the KNX Function Via DCA (from ETS5)46
Integration into the KNX System (ETS)46
Prerequisites46
Installation of the Busch-Smarttouch ETS Touch DCA App47
Installation Sequence48
Integrating the ABB Smarttouch ® into the ETS49
Overview of the DCA Commissioning Tool50
Starting the DCA50
Screen Areas of the DCA51
Explanation of the Basic Structure (Terms)53
Commissioning Sequence55
Configuring Basic Settings for the Panel55
Basic Settings (System Settings) of the Panel56
Creating the Navigation Structure70
Creating Operating Pages (Start70
Creating Room and Floor71
Editing Operating71
Configuration of the Operating73
Switch" Control Element74
Control Element "Rocker Switch74
Dimmer" Control Element74
Control Element: "Dimmer Slider74
Operation of "RGBW" Control Element74
Blind" Control Element75
Control Element "RTC Control Element75
Control Element "Fan Switch75
Control Element "Split Unit Control75
Control Element "VRV Control75
Scene" Control Element76
Control Element: "Value Slider76
Display" Control Element76
Control Element "Audio Control76
Page Link" Control Element76
Control Element "Welcome Control77
Editing Control Elements78
Delete Control Element78
Copy Control Element79
Add Control Element to Favourites List79
Configuration of Applications and Application80
Application "Door Communication80
Application "Fault and Alarm Messages81
Application "Scene Actuator82
Application "Presence Simulation82
Application "Time Programs83
Application "Logical Functions83
Application "Internal RTC84
Favourite Control Elements84
Editing Communication Objects86
Editing Group Addresses87
Additional Tools (Functions)88
Import88
Export89
Preview89
Reset Layout89
Reset All89
Commissioning Via ABB-Free@Home90
Allocation of Devices and Definition of Channels90
Add Device91
Setting Options Per Channel93
Parameter Settings of Panel94
Parameter Settings Channel97
Other Settings99
Specifying or Editing Functions (Buttons)101
Creating Functions101
Changing Functions104
Removing Functions105
KNX Control Elements and Application Parameters106
Switch" Control Element106
Name of the Control Element106
Size of the Button106
Type of Switch106
Object Type 1 / Value 2107
Status Control Element (Icon/Text) Is Operated Via a Separate Object110
Icon Type110
Enable 1-Bit Communication Object "Disable112
Control Element "Rocker Switch113
Name of the Control Element113
Function of the Control Element113
Size of the Button113
Icon Type113
Status Control Element (Icon/Text) Is Operated Via a Separate Object114
Object Type115
Enable 1-Bit Communication Object "Disable118
Dimmer" Control Element119
Name of the Control Element119
Function of the Control Element119
Size of the Button119
Icon Type119
Icon for on / Icon for off120
Position for DIM up Icon120
Icon for Dimming up / Icon for Dimming down120
Status Control Element (Icon) Is Operated Via a Separate Object120
Status of Dimming Value Is Controlled by a Separate Object120
Manner of Dimming121
Enable 1-Bit Communication Object "Disable122
Control Element: "Dimmer Slider123
Name of the Control Element123
Function of the Control Element123
Size of the Button123
Icon Type123
Icon for on / Icon for off124
Status Control Element (Icon) Is Operated Via a Separate Object124
Display Value in Control Element125
Slider Sends126
Brightness Change [%]126
Enable 1-Bit Communication Object "Disable126
Operation of "RGBW" Control Element127
Name of the Control Element127
Function of the Control Element127
Display Value in Control Element127
Type of Colour/White Lamp127
Brightness Change [%]130
Telegram Is Repeated Every [Sec.]130
Enable 1-Bit Communication Object "Disable130
Blind" Control Element131
Name of the Control Element131
Function of the Control Element131
Size of the Button131
Type of Control131
Icon Type132
Status Control Element (Icon) Is Operated Via a Separate Object133
Enable 1-Bit Communication Object "Disable134
Control Element "RTC Control Element135
Name of the Control Element135
Function of the Control Element135
Additional Functions/Objects135
Delay Time During Reading of Telegrams after Reset [Sec.]135
Input for Temperature Reading136
Display Actual Temperature136
Unit of Temperature136
Set Value Is Relative137
Heating/Cooling Switchover138
Fan Coil Control During Heating Mode138
Fan Coil Control During Cooling Mode138
Setting the Temperature Unit Via Object138
Enable 1-Bit Communication Object "Disable138
Control Element "Fan Switch139
Name of the Control Element139
Function of the Control Element139
Size of the Button139
Deactivation of Switch-Off Option139
Icon Type140
Telegram Is Repeated Every [Sec.]140
Number of Levels141
Object Type141
Display Status143
Enable 1-Bit Communication Object "Disable144
Control "Split Unit Control145
Name of the Control Element145
Name of Room (Otional)145
Size of the Button145
Function Icon145
Display Actual Temperature145
Minimum Setpoint146
Maximum Setpoint146
Step Size of Setpoint Adjustment146
Number of Fan Speed Levels (Without AUTO)146
Use Automatic Mode for Fans146
Use Mode: Automatic146
Use Mode: Heating147
Use Mode: Cooling147
Use Mode: Drying147
Use Mode: Fan147
Use Horizontal Oscillation147
Use Vertical Oscillation147
Use Extra Mode: Silence Mode148
Use Additional Mode: Boost148
Use Additional Mode: Forced Operation148
Use Additional Mode: Scene148
Additional Mode Use Window Contact149
Use Additional Presence Mode149
Enable 1-Bit Communication Object "Disable149
Control "Split Unit Control150
Name of the Control Element150
Name of Room (Otional)150
Size of the Button150
Function Icon150
Value [1 Byte 0-255] for Heating Mode151
Value [1 Byte 0-255] for Cooling Mode151
Using Fan Operation151
Value [1 Byte 0-255] for Fan Operation151
Using Dehumidification Operation151
Value [1 Byte 0-255] for Dehumidification Operation151
Using Automatic Operation151
Value [1 Byte 0-255] for Automatic Operation152
Fan Speed Levels153
Value for the Speed X153
Using Automatic Fan Speed Control153
Value for Automatic Fan Speed X153
Step Size154
Maximum Setpoint [°C]154
Minimum Setpoint [°C]154
Using VRV Temperature Sensor Error Display155
Using VRV Error Display155
Value for Cancelling the VRV Error Display155
Enable 1-Bit Communication Object "Disable155
Scene" Control Element156
Name of the Control Element156
Function of the Control Element156
Start Scene at Selection156
Long Operation after156
Number of Scenes [1 - 10]156
Scene Number X [1 - 64]157
Name of Scene X157
Saving Scene X with a Long Press157
Enable 1-Bit Communication Object "Disable157
Control Element: "Value Slider158
Name of the Control Element158
Function of the Control Element158
Size of the Button158
Slider from158
Display Value in Control Element159
Slider Sends159
Object Type160
Enable 1-Bit Communication Object "Disable161
Display" Control Element162
Name of the Control Element162
Function of the Control Element162
Type of Display Element162
Type of Display Element - Status Display - Size of the Button163
Type of Display Element - Status Display - Object Type163
Type of Display Element - Value Display - Size of the Button164
Type of Display Element - Value Display - Object Type164
Type of Display Element - Linear Measurement Display - Measurement Display with Colour Display166
Type of Display Element - Linear Measurement Display - Display Value in Control Element166
Type of Display Element - Linear Measurement Display - Object Type168
Type of Display Element - Round Measurement Display169
Type of Display Element - Wind Rose170
Type of Display Element - Wind Force - Size of the Button170
Type of Display Element - Wind Force - Unit171
Type of Display Element - Temperature - Size of the Button171
Type of Display Element - Temperature - Unit171
Type of Display Element - Rain - Size of the Button171
Type of Display Element - Rain - Text for Rain171
Type of Display Element - Rain - Text for no Rain171
Type of Display Element - Twilight - Size of the Button172
Type of Display Element - Twilight - Unit172
Type of Display Element - Brightness172
Type of Display Element - CO - Size of the Button172
Type of Display Element - CO - Unit172
Type of Display Element - Moisture - Size of the Button172
Type of Display Element - Moisture - Unit173
Type of Display Element - Air Pressure - Size of the Button173
Type of Display Element - Air Pressure - Unit173
Enable 1-Bit Communication Object "Disable173
Control Element "Audio Control174
Name of the Control Element174
Function of the Control Element174
Number of Sources174
Use of Play Button175
Use of Pause Button175
Use of Stop Button176
Use of Forward Button176
Use of Return Key177
Use of Button for Mute178
Use of Volume Button179
Use of ON/OFF Button180
Enable 1-Bit Communication Object "Disable180
Page Link" Control Element181
Name of the Control Element181
Function of the Control Element181
Size of the Button181
Linked with Page181
Enable 1-Bit Communication Object "Disable182
Control Element "Audio Control183
Name of the Control Element183
Name of Room (Otional)183
Size of the Button183
Function Icon183
Type of the Control Element183
Using Trigger Object183
Trigger with184
Enable 1-Bit Communication Object "Disable184
Application "Door Communication185
Use of Door Communication185
Page PIN-Protected185
Ring Tone Volume Preset [%]185
Speech Volume Preset [%]186
Application "Fault and Alarm Messages" - Global Settings187
Use of Fault and Alarm Messages187
Page PIN-Protected187
Enable Export188
Automatic Archiving at an Acknowledgement188
Sound for Alarm188
Sound for Notice188
Signal Tone for Error189
Default Setting for Signal Tone Volume [%]189
Application "Fault and Alarm Messages" - Settings of the Individual Messages190
Name of Message190
Type of Message190
Type of Alarm190
Application "Scene Actuator192
Name of Scene Actuator192
Number of Participants192
Number of Scenes192
Overwriting Scenes During Download192
Telegram Delay192
Object Type X193
Name of Scene196
Scene Number196
Light Scenes Can be Started with196
Light Scene Can be Stored196
Object X Is to be Changed196
Application "Presence Simulation197
Use of Presence Simulation197
Page PIN-Protected197
Enable Export197
Delay Time up to Activation [Min.]198
Object Type 1-20198
Application "Time Programs199
Page PIN-Protected199
Overwriting Time Programs During Download199
Application "Logical Functions200
Channel X - Application200
Application "Internal RTC211
General - Device Function211
General - Control Function211
General - Operating Mode after Reset212
General - Send Cyclic "In Operation" (Min)213
General - Additional Functions/Objects213
General - Delay Time for Read Telegrams after Reset [S]213
Heating Control - Control Value Type214
Heating Control - Heating Type215
Heating Control - P-Component (X 0.1°C)215
Heating Control - I-Component (Min.)216
Heating Control - Extended Settings216
Basic Stage Heating216
Basic Stage Heating - Status Object Heating216
Basic Stage Heating - Mode of the Control Value216
Basic Stage Heating - Hysteresis (X 0.1°C)217
Basic Stage Heating - Control Value Difference for Sending of Heating Control Value217
Basic Stage Heating - Cyclic Sending of the Control Value (Min)217
Basic Stage Heating - PWM Cycle Heating (Min)218
Basic Stage Heating - Maximum Control Value (0 - 255)218
Basic Stage Heating - Minimum Control Value for Basic Load (0 to 255)218
Settings of Basic Load - Minimum Control Value for Basic Load > 0219
Basic Load Settings - Basic Load Active When Controller Is off219
Setpoint Settings - Setpoint Temperature for Heating Comfort (°C)220
Setpoint Settings - Reduction for Standby Heating (°C)220
Setpoint Settings - Reduction for ECO Heating (°C)220
Setpoint Settings - Set-Point Temperature for Frost Protection (°C)221
Setpoint Settings - Send Current Setpoint221
Setpoint Settings - Cyclic Sending of the Current Set-Point Temperature (Min)221
Setpoint Adjustment - Maximum Manual Increase During Heating Mode (0 - 9°C)221
Setpoint Adjustment - Maximum Manual Reduction During Heating Mode (0 - 9°C)222
Setpoint Adjustment - Resetting of the Manual Adjustment for Receipt of a Basic Setpoint222
Setpoint Adjustment - Resetting the Manual Adjustment for Change of Operating Mode222
Setpoint Adjustment - Resetting the Manual Adjustment Via Object223
Setpoint Adjustment - Permanent Storage of On-Site Operation223
Temperature Reading - Inputs of Temperature Reading223
Temperature Reading - Inputs of Weighted Temperature Reading223
Temperature Reading - Weighting of Internal Measurement (0 to 100%)224
Temperature Reading - Weighting of External Measurement (0 to 100%)224
Temperature Reading - Weighting of External Measurement 2 (0 to 100%)224
Temperature Reading - Cyclic Sending of the Actual Temperature (Min)224
Temperature Reading - Difference of Value for Sending the Actual Temperature (X 0.1°C)225
Temperature Reading - Adjustment Value for Internal Temperature Measurement (X 0.1°C)225
Temperature Reading - Monitoring Time for Temperature Reading (0 = no Monitoring) (Min)225
Temperature Reading - Control Value for Fault (0 - 255)226
Alarm Functions - Frost Alarm Temperature for HVAC and RHCC Status (°C)227
Alarm Functions - Heat Alarm Temperature for RHCC Status (°C)227
Control of Additional Heating Stage - Temperature Difference to Basic Stage (X 0.1°C)227
Control of Additional Heating Stage - Additional Heating Type228
Control of Additional Heating Stage - P-Component (X 0.1°C)228
Control of Additional Heating Stage - I-Component (Min)229
Cooling Control - Cooling Type229
Cooling Control - P-Component (X 0.1°C)230
Cooling Control - I-Component (Min.)230
Cooling Control - Extended Settings230
Basic Stage Cooling231
Basic Stage Cooling - Status Object Cooling231
Basic Stage Cooling - Mode of the Control Value231
Basic Stage Cooling - Hysteresis (X 0.1°C)232
Basic Stage Cooling - Cyclic Sending of the Control Value (Min)232
Basic Stage Cooling - PWM Cycle Cooling (Min)233
Basic Stage Cooling - Maximum Control Value (0 - 255)233
Basic Stage Cooling - Minimum Control Value for Basic Load (0 to 255)233
Settings of Basic Load - Minimum Control Value for Basic Load > 0234
Basic Load Settings - Basic Load Active When Controller Is off234
Setpoint Settings - Setpoint Temperature for Cooling Comfort (°C)235
Setpoint Settings - Increase for Standby Cooling (°C)235
Setpoint Settings - Increase for ECO Cooling (°C)235
Setpoint Settings - Set-Point Temperature for Heat Protection (°C)236
Setpoint Settings - Send Current Setpoint236
Setpoint Settings - Cyclic Sending of the Current Set-Point Temperature (Min)236
Setpoint Adjustment - Maximum Manual Increase During Cooling Mode (0 - 9°C)236
Setpoint Adjustment - Maximum Manual Reduction During Cooling Mode (0 - 9°C)237
Setpoint Adjustment - Resetting of the Manual Adjustment for Receipt of a Basic Setpoint237
Setpoint Adjustment - Resetting the Manual Adjustment for Change of Operating Mode237
Setpoint Adjustment - Resetting the Manual Adjustment Via Object238
Setpoint Adjustment - Permanent Storage of On-Site Operation238
Temperature Reading - Inputs of Temperature Reading238
Temperature Reading - Inputs of Weighted Temperature Reading239
Temperature Reading - Weighting of Internal Measurement (0 to 100%)239
Temperature Reading - Weighting of External Measurement (0 to 100%)239
Temperature Reading - Weighting of External Measurement 2 (0 to 100%)240
Temperature Reading - Cyclic Sending of the Actual Temperature (Min)240
Temperature Reading - Difference of Value for Sending the Actual Temperature (X 0.1°C)240
Temperature Reading - Adjustment Value for Internal Temperature Measurement (X 0.1°C)241
Temperature Reading - Monitoring Time for Temperature Reading (0 = no Monitoring) (Min)242
Temperature Reading - Control Value for Fault (0 - 255)242
Alarm Functions - Condensate Water Alarm242
Alarm Functions - Dew Point Alarm243
Alarm Functions - Frost Alarm Temperature for HVAC and RHCC Status (°C)243
Alarm Functions - Heat Alarm Temperature for RHCC Status (°C)243
Summer Compensation243
Summer Compensation - Summer Compensation244
Summer Compensation -- (Lower) Starting Temperature for Summer Compensation (°C)245
Summer Compensation - Offset of the Set-Point Temperature for the Entry into Summer Compensation (X 0.1°C)245
Summer Compensation - (Upper) Exit Temperature for Summer Compensation (°C)245
Summer Compensation - Offset of the Set-Point Temperature for the Exit from Summer Compensation (X 0.1°C)246
Control of Additional Cooling Stage - Cooling Type247
Control of Additional Cooling Stage - P-Component (X 0.1°C)247
Control of Additional Cooling Stage - P-Component (Min)248
Combined Heating and Cooling Modes248
Combined Heating and Cooling Modes - Switchover of Heating/Cooling248
Combined Heating and Cooling Modes - Operating Mode after Reset249
Combined Heating and Cooling Modes - Heating/Cooling Control Value Output249
Setpoint Settings - Setpoint for Heating Comfort = Setpoint for Cooling Comfort249
Setpoint Settings - Hysteresis for Switchover Heating/Cooling (X 0.1°C)250
Setpoint Settings - Setpoint Temperature for Heating and Cooling Comfort (°C)250
Temperature Reading - Operating Mode for Fault250
Output252
Communication Objects252
Operation274
General Control and Display Functions274
Control Elements276
Basic Structures of Control Elements277
Additional Basic Principles278
Adjustable Control Elements280
Special Functions289
Editing289
Adding Control Elements to the Dashboard290
Access to291
Return to the Previous Page291
Operating Actions of the "Door Communication" Application292
Setting up of Video Surveillance294
Establishing a Speech and Video Connection295
Opening the Door296
Activating Mute (Mite Timer)297
Switching Light298
Events and Image Storage / History299
Control Actions of Additional Applications300
Presence Simulation300
Fault and Alarm Messages302
Time Programs306
Inserting the Micro SD Card (SDHC)309
System Settings309
System Settings - Display311
System Settings - Sound313
System Settings - Network Connections314
System Settings - Time and Date315
System Settings - Access Management316
System Settings - User Settings317
System Settings - Video Surveillance317
System Settings - Intercom List318
System Settings - Programming Button320
System Settings - Extended Settings320
System Settings - Software Update321
System Settings - Via322
Terminal Resistor323
Setting Master/Slave Switches323
Update324
Transfer of PID File (Configuration File)324
Addressing325
Maintenance326
Cleaning326
Notes326
Index327

Brand	ABB
Model	SmartTouch i-bus KNX
Category	Touch Panel
Language	English

ABB SmartTouch i-bus KNX User Manual

Table of Contents

Questions and Answers:

ABB SmartTouch i-bus KNX Specifications

Related product manuals