ABB SmartTouch i-bus KNX User Manual

KNX control elements and application parameters
Control element: "Value slider"
Product manual 2CKA00xx73xxxxx
│
161
Maximum object value:
Options: Setting option depends on the selected object type.
The parameter is used to specify the largest value that is sent via telegrams.
Any value within the limits specified by the object type and its value range can be entered.
Displayed minimum value:
Options: Setting option depends on the selected object type.
The parameter is used to specify the smallest value displayed by the control element on the
control element.
Any value within the limits specified by the object type and its value range can be entered. The
value can deviate from the setting of parameter "Minimum object value".
Displayed maximum value:
Options: Setting option depends on the selected object type.
The parameter is used to specify the largest value displayed by the control element on the
control element.
Any value within the limits specified by the object type and its value range can be entered. The
value can deviate from the setting of parameter "Maximum object value".
10.12.8 Enable 1-bit communication object "Disable"
Options: Deactivated
Activated
There is the option of temporarily disabling the function via an additional communication object
"Disable".


ABB SmartTouch i-bus KNX Specifications

General

Brand	ABB
Model	SmartTouch i-bus KNX
Category	Touch Panel
Language	English