Agilent Technologies 33250A User Manual

231
Chapter 4 Remote Interface Reference
The SCPI Status System
4
The Questionable Data Register
The Questionable Data register group provides information about the
quality or integrity of the function generator. Any or all of these conditions
can be reported to the Questionable Data summary bit through the
enable register. To set the enable register mask, you must write a
decimal value to the register using the STAT:QUES:ENABle command.
Bit Definitions – Questionable Data Register
Bit Number
Decimal
Value Definition
0 Voltage Overload
1 Not Used
2 Not Used
3 Not Used
4
Over Temperature
5 Loop Unlocked
6 Not Used
7
External Mod Overload
8 Calibration Error
9 External Reference
10 Not Used
11 Not Used
12 Not Used
13 Not Used
14 Not Used
15 Not Used
1
2
4
8
16
32
64
128
256
512
1024
2048
4096
8192
16384
32768
Voltage overload on OUTPUT connector.
The Output has been disabled.
Not Used. Returns “0”.
Not Used. Returns “0”.
Not Used. Returns “0”.
Internal temperature is too high and a
power shutdown is likely.
Function generator has lost phase lock.
Frequency accuracy will be affected.
Not Used. Returns “0”.
Voltage overload on MOD IN connector.
Error occurred during cal, or cal memory
lost, or calibration is unsecured.
External timebase is being used.
Not Used. Returns “0”.
Not Used. Returns “0”.
Not Used. Returns “0”.
Not Used. Returns “0”.
Not Used. Returns “0”.
Not Used. Returns “0”.

Agilent Technologies 33250A Specifications

General

Brand	Agilent Technologies
Model	33250A
Category	Inverter
Language	English