Agilent Technologies U1252B User Manual

48 Agilent U1251B/U1252B User’s and Service Guide
2 Making Measurements
Charge terminal alert
The meter sounds an alert beep when the terminal
detects a voltage level of more than 5 V and the rotary
switch is not set to the corresponding location. The
primary display indicates a flashing “Ch.Err” until the lead
is removed from the input terminal. Refer to
Figure 2- 17 below.
Figure 2-17 Charge terminal alert

Agilent Technologies U1252B Specifications

General

Brand	Agilent Technologies
Model	U1252B
Category	Multimeter
Language	English