Agilent Technologies U1252B User Manual

Changing The Default Setting 4
Agilent U1251B/U1252B User’s and Service Guide 79
Setting Data Logging Mode
1 Set to “Hand” to enable the manual data logging mode.
2 Set the interval within 0001—9999 seconds to enable
interval (automatic) data logging mode.
3 Press and hold or for more than 1 second to
switch between manual and interval data logging setup.
Figure 4-2 Data logging setup
Press
Press
Press
Press to
set interval
Press
or
Press
> 1 second

Agilent Technologies U1252B Specifications

General

Brand	Agilent Technologies
Model	U1252B
Category	Multimeter
Language	English