Operations and Features 2
U3402A User’s and Service Guide 37
[1]
The range for both primary and secondary display are corresponding to the higher range of two
displays (autoranging mode, while the range of secondary display are the same as the primary
displays (manual range mode).
[2]
The frequency measurement corresponding to the current input signals; other measurements are
corresponding to the voltage input signals.
[3]
In dual display mode, users are recommended to measure the resistance up to 1 M
W
.
[4]
At 12 A range, manual range mode is selected by default.
[5]
Measurable with non-guaranteed accuracy.
[6]
Autoranging mode by default.
[7]
The voltage or current range of the frequency function follows the voltage or current range of the
other function.
Ta b l e 2- 3 Description for dual display combination
Primary Display Secondary Display
DCV ACV
DCI
[4]
ACI
[4]
Hz
[7]
DCV
✔
[1]
✔
[1]
✔✔✔
ACV
✔
[1]
✔
[1]
✔✔✔
DCI
[4]
✔✔✔
[1]
✔
[1]
✔
[2]
ACI
[4]
✔✔✔
[1]
✔
[1]
✔
[2]
ACV + DCV
✔
[1]
✔
[1]
✔✔✔
ACI + DCI
[4] ✔✔✔
[1]
✔
[1]
✔
[2]
Frequency
[7]
✔✔✔
[2]
✔
[2]
✔
Resistance
[3]
✔✔
[5]
✔✔
[5]
✔
[5]
Diode/Continuity
✔✔
[5]
✔✔
[5]
✔
[5]
dBm
[6] ✔✔✔ ✔✔
In dual display mode, the
The multimeter has an increased key response time (0.6 s to 1 s) when in dual display
mode. You may need to press the selected key until the multimeter responses.
U3402-90001.book Page 37 Friday, July 24, 2009 4:04 PM
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
Need help?
General
