Quick Start
PowerFlex
®
700S Drives - Phase I Control (Frame
Sizes 9 & 10)
Introduction
This document is designed to guide you through the basic steps needed to install,
start-up, and program PowerFlex 700S AC drives with Phase I Control and frame
sizes 9 & 10. The information provided does not replace the user manual and is
intended for qualified personnel only. For detailed PowerFlex 700S information
refer to the appropriate publications:
Title Publication Available
User Manual - PowerFlex 700S
Drive with Phase I Control
20D-UM001
www.rockwellautomation.com/literature
Installation Instructions -
PowerFlex 700S and 700H High
Power Drives
PFLEX-IN006
Reference Manual - PowerFlex
700S Drive with Phase I Control
PFLEX-RM002
Wiring and Grounding Guidelines
for Pulse Width Modulated Drives
DRIVES-IN001
To Next Page
Need help?
General
