2-88 HIM Memory
HIM Memory See Copy Cat on page 2-39.
HIM Operations Selecting a Language
See also Language on page 2-91. PowerFlex 700 drives support multiple
languages. When you first apply drive power, a language screen appears on
the HIM. Use the Up or Down Arrow to scroll through the available
languages. Press Enter to select the desired language. To switch to an
alternate language, follow the steps below.
Using Passwords
By default the password is set to 00000 (password protection disabled).
Logging in to the Drive
Logging Out
To change a password
The User Display
The User Display is shown when module keys have been inactive for a
predetermined amount of time. The display can be programmed to show
pertinent information.
Step Key(s) Example Displays
1. Press ALT and then the Up Arrow (Lang).
The Language screen will appear.
2. Press the Up Arrow or Down Arrow to scroll
through the languages.
3. Press Enter to select a language.
Step Key(s) Example Displays
1. Press the Up or Down Arrow to enter your
password. Press Sel to move from digit to
digit.
2. Press Enter to log in.
Step Key(s) Example Displays
You are automatically logged out when the User
Display appears. If you want to log out before
that, select “log out” from the Main Menu.
Step Key(s) Example Displays
1. Use the Up Arrow or Down Arrow to scroll to
Operator Intrfc. Press Enter.
2. Select “Change Password” and press Enter.
3. Enter the old password. If a password has
not been set, type “0.” Press Enter.
4. Enter a new password (1- 65535). Press
Enter and verify the new password. Press
Enter to save the new password.
ALT
+
Speak English?
Parlez Francais?
Spechen Duetsch?
Plare Italiano?
Login: Enter
Password 9999
Operator Intrfc:
Change Password
User Display
Parameters
Password:
Old Code: 0
New Code: 9999
Verify: 9999
To Next Page
Loading...
Need help?
General
