Mio Modero® R-4 Remote
Display Features
The Mio R-4 remote device supports the following display features:
General Buttons
Bargraphs
Multistate General Buttons
Multistate Bargraph Buttons
Joystick Buttons
Animated Icons
List Buttons
Marquee Text
These features can be implemented using TPDesign4 or higher. For details, please refer to the TPDesign4 online help or
Instruction Manual, both available from www.amx.com.
Device Navigation
The Mio R-4 allows you to scroll through pages using the up and down buttons beneath the touch screen. Pressing the
Back buttons moves the selection back by one page while holding the button down returns the device to the power up
page.
FCC Compliance
This radio module was tested and certified as a stand-alone device according to FCC Rules CFR 47, Part 15, Subpart C.
If this device is installed in a manner such that the radio module FCC ID label is not visible on the outside of the end
product, a label must be placed on the end product with the following statement:
This device complies with Part 15 of the FCC rules. Subject to the following two conditions:
1. This device must not cause harmful interference and
2. This device must accept all interference, including interference that interferes with the operation of this device. "
Modifications not expressly approved by the manufacturer will void the user’s authority to operate the equipment.
Patents
This product is covered by the following patents:
AMX
U.S. Patent No. D 602,858
U.S. Patent No. D 520,495
U.S. Patent No. 7,786,623
This product employs or practices certain features and/or methods of one or more of the following patents:
SIPCO, LLC
U.S. Patent No. 7,103,511
U.S. Patent No. 6,914,893
U.S. Patent No. 7,697,492
This device has been evaluated and found to be compliant with the FCC Rules for RF
Exposure when the device is operated at a minimum separation distance of 2 cm.
from the user and nearby persons. Operation of this device at closer distances
should be avoided.”