Device Setup Pages
Getting time and date from your NetLinx Master
1.
Select Date/Time Settings from the Setup Page.
2. Select Get under Set Date & Time.
3. Select the Back button until you are out of the Setup Menu.
Sound Settings
The device can provide an audible indicator of both hit and miss of button selections.
Setting the Volume
1.
Select Sound Settings from the Setup Page.
2. Select the Up and Down arrow under Vol um e to increase or decrease the sound volume by one setting. The settings
are Mute, Low, Medium, and High.
3. Select the Back button until you are out of the Setup Menu.
Testing the Sound Settings
1.
Select Sound Settings from the Setup Page.
2. Select either the Mute, Button Hit, or Button Miss button. The button will turn green when properly selected.
3. Push Play Test to test the sound and the volume.
Date/Time Settings (Cont.)
Minute Selects the chosen minute for the time.
Second Selects the chosen second for the time.
If the time and date are changed on the Mio R-4 and the device is online with a
NetLinx Master, the time and date will also be changed on the NetLinx Master.
FIG. 9 Sound Settings Page
Sound Settings
Volume Adjusts the volume of the sound.
Mute Silences any button sound.
Play Test Plays a test tune consisting of a single octave of the musical scale.
Button Hit Enables or disables the sound of a correctly chosen button.
Button Miss Enables or disables the sound of an incorrectly chosen button.
The Mio R-4 will allow the Mute button to be selected along with the Button Hit or
Button Miss buttons. In this case, the Mute button overrides any sound produced by
any of the other buttons.