AMX MIO-R4 Instruction Manual

Programming the Mio R-4
67
Mio Modero R-4 Remote
List Box Commands (Cont.)
Data List Commands
^LDA Adds a new row to an existing data list. Primary data is required.
Syntax:
SEND_COMMAND <DEV>,"'^LDA-<list address>,<uniflag>,<primary data>,<data2>…'"
Variables:
• list address = address where data resides
• uniflag = indicates unicode; 0 - No unicode, 1 - Uses unicode
• primary data = the "key" data column. The information in this column provides each row with its uniqueness.
• data2 = variable, column data information. The number of data fields is limited only to the number of columns
in the data list.
Example:
SEND_COMMAND Device,"'^LDA-1,0,Entry5,Meatloaf,Best of,Anything for Love'"
Adds a text row to the data list located at address 1. The primary data is set as Entry5. Meatloaf, Best of, and
Anything for Love are all cells within the new row.
Example (unicode):
SEND_COMMAND Device,"'^LDA-
1,1,0045006E0074007200790035,004D006500610074006C006F00610061,00420065007300740020006F0
066,0041006E0079007400680069006E006700200066006F00720020004C006F00760065'"
Adds a unicode text row to the data list located at address 1. The primary data is set as Entry5. Meatloaf, Best of,
and Anything for Love are all cells within the new row.
^LDR Removes a row from an existing data list.
Syntax:
SEND_COMMAND <DEV>,"'^LDR-<list address>,<uniflag>,<primary data>'"
Variables:
• list address = address where data resides
• uniflag = indicates unicode; 0 - No unicode, 1 - Uses unicode
• primary data = the "key" data column. The information in this column provides each row with its uniqueness.
Example:
SEND_COMMAND Device,"'^LDR-1,0,Entry5'"
Removes the text row with primary data Entry5 from an existing data list at address 1.
^LDC Clears all rows in a given list.
Syntax:
"'^LDC-<list address>'"
Variables:
• list address = address where data resides
Example:
SEND_COMMAND Device, "'^LDC-1'"
Clears all rows in data list located at address 1.
^LDD Deletes the data list
Syntax:
"'^LDD-<list address>'"
Variables:
• list address = address where data resides
Example:
SEND_COMMAND Device, "'^LDD-1'"
Deletes the data list located at address 1.

AMX MIO-R4 Specifications

General

Flash memory	32 MB
RAM capacity	64 MB
Certification	FCC, IC, CE, IEC 60950, Japan Approval
Maximum range	30 m
Frequency band	2.4 GHz
Languages support	ARA, CHI (SIMPL), DEU, ENG, ESP, FRE, GRE, HUN, ITA, JPN, KOR, POR, RUS, THA
Number of devices supported	2
Interface	IR Wireless
Input type	Press buttons
Hard buttons	Yes
Product color	Black
Buttons quantity	29
Remote control proper use	-
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Package weight	25 g

Weight and Dimensions

Depth	19 mm
Width	51 mm
Height	240 mm
Weight	20 g