AMX MIO-R4 Instruction Manual

Protected Settings Menu
26
Mio Modero R-4 Remote
Reboot Page
Some changes to the device settings require a reboot before the changes are accepted. This may be accessed through the
Reboot page (FIG. 21).
Rebooting the Device
1.
Select Protected Settings from the Setup Page.
2. Select Reboot Panel.
3. Select Reboot. The device will reboot and restart.
4. To calibrate the touchscreen, touch and hold the touchscreen during the reboot and release when the Calibrate Test
page (page 22) appears.
Test Pages
The Test Pages are for testing the Mio R-4’s touchscreen. To check the touchscreen:
1. Select Protected Settings from the Setup Page.
2. Select Test Pages.
3. The subsequent displayed pages are all one color, intended to differentiate touchscreen pixels that may no longer be
functioning. After checking each colored page, touch the screen to move to the next colored page. The pages run
through blue, green, red, white, black, and then blue again.
4. When finished inspecting the colored pages, select the Back button until you are out of the Setup Menu.
FIG. 21 Reboot Page

AMX MIO-R4 Specifications

General

Flash memory	32 MB
RAM capacity	64 MB
Certification	FCC, IC, CE, IEC 60950, Japan Approval
Maximum range	30 m
Frequency band	2.4 GHz
Languages support	ARA, CHI (SIMPL), DEU, ENG, ESP, FRE, GRE, HUN, ITA, JPN, KOR, POR, RUS, THA
Number of devices supported	2
Interface	IR Wireless
Input type	Press buttons
Hard buttons	Yes
Product color	Black
Buttons quantity	29
Remote control proper use	-
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Package weight	25 g

Weight and Dimensions

Depth	19 mm
Width	51 mm
Height	240 mm
Weight	20 g