Protected Settings Menu
Options & Recovery Page
The Options & Recovery page (FIG. 14) enables you to enable page tracking and function identification features, as well
as to reset system settings and remove all currently loaded user pages.
Checking the Device Number
1.
Select Protected Settings in the Setup Menu.
2. Select Options & Recovery. The device number is displayed at the top of the first page.
Toggling the Function Show option
1.
Select Options & Recovery in the Protected Settings Menu.
2. Select Function Show. Not only will the button turn green, but every button or display with a function code will
display that function code.
3. To turn off the Function Show feature, select Function Show again. The function codes will disappear and the
button will return to its normal color.
4. Select the Back button until you are out of the Setup Menu.
Toggling the Page Tracking Option
1.
Select Options & Recovery in the Protected Settings Menu.
2. Select Page Tracking; page tracking will start when the button turns green.
3. To disable page tracking, select Page Tracking again, and the button will return to blue.
4. Select the Back button until you are out of the Setup Menu.
FIG. 14 Options & Recovery Page
Options & Recovery
Device Number The device’s NetLinx Device Number.
Function Show When enabled, displays the function codes for each button push.
Page Tracking When enabled, reports all page flips to the NetLinx master.
Reset System Settings Returns all systems settings to factory defaults.
Remove User Pages Removes any custom designed control pages.
Protection Enables or disables Front Button Setup Access
The NetLinx master will track all page flips if the String handler for the device Data
event is set in the NetLinx code.