AMX MIO-R4 Instruction Manual

Mio Modero® R-4 Remote
1
Mio Modero R-4 Remote
Mio Modero
®
R-4 Remote
Overview
The Mio Modero
®
R-4 remote provides custom control features, contained in an elegant hand-held rechargeable
device(FIG. 1). The Mio R-4 communicates with a NetLinx master via a wireless ZigBee network: the device comes
with installed firmware for connecting to a ZigBee Pro 2007 network, but it can be updated with firmware to allow it to
connect to older ZigBee 2004 networks.
Selecting a source device sends a command to the master and runs predetermined events associated with that source.
Selecting a macro will run predefined events, which might not be associated with sources listed, then return the device to
its previous mode.
You will need TPDesign4 to properly program this device. Both the application and its documentation are available from
www.amx.com.
FIG. 1 The Mio R-4 (front panel)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Numeric Keypad
19
Touch Screen
20
1 - Power
2 - Guide
3 - Exit
4 - Menu
5 - Information
6 - Move Up
7 - Move Down
8 - Move Left
9 - Move Right
10 - Select
11 - Volume Up
12 - Volume Down
13 - Channel Up
14 - Channel Down
15 - Last Viewed
16 - Mute
17 - Input
18 - Enter
19 - Back/Home
20 - Up/Down Touch Screen Navigation

AMX MIO-R4 Specifications

General

Flash memory	32 MB
RAM capacity	64 MB
Certification	FCC, IC, CE, IEC 60950, Japan Approval
Maximum range	30 m
Frequency band	2.4 GHz
Languages support	ARA, CHI (SIMPL), DEU, ENG, ESP, FRE, GRE, HUN, ITA, JPN, KOR, POR, RUS, THA
Number of devices supported	2
Interface	IR Wireless
Input type	Press buttons
Hard buttons	Yes
Product color	Black
Buttons quantity	29
Remote control proper use	-
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Package weight	25 g

Weight and Dimensions

Depth	19 mm
Width	51 mm
Height	240 mm
Weight	20 g