AMX MIO-R4 Instruction Manual

Protected Settings Menu
25
Mio Modero R-4 Remote
ZigBee Diagnostics
The ZigBee Diagnostics page (FIG. 20) is a report of the wireless networks found and the status of their availability to
the device. This allows assessment of a network connection to the device while moving through a particular area, for
instance. The ZigBee Diagnostics page is accessed by pressing the ZigBee Diagnostics button on the second System
Settings page (page 22)
To return to the previous page when finished, press the Back button on the remote.
FIG. 20 ZigBee Diagnostics page
RF Link Info
Parent ID: The ID number of the ZigBee gateway currently being contacted by the device. Any number other than
“0” (zero) indicates that the network signal is going through a repeater.
Pan ID: The PAN ID number of the device.
Channel: The ZigBee channel currently being used by the device.
TX Link Quality The connection quality for transmission.
RX Link Quality The connection quality for reception.
Latency: The delay detected in the network connection.
Progress: This scroll bar shows the progress of finding a ZigBee PAN within range of the device. Continuous
scrolling means that the device is connected.

AMX MIO-R4 Specifications

General

Flash memory	32 MB
RAM capacity	64 MB
Certification	FCC, IC, CE, IEC 60950, Japan Approval
Maximum range	30 m
Frequency band	2.4 GHz
Languages support	ARA, CHI (SIMPL), DEU, ENG, ESP, FRE, GRE, HUN, ITA, JPN, KOR, POR, RUS, THA
Number of devices supported	2
Interface	IR Wireless
Input type	Press buttons
Hard buttons	Yes
Product color	Black
Buttons quantity	29
Remote control proper use	-
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Package weight	25 g

Weight and Dimensions

Depth	19 mm
Width	51 mm
Height	240 mm
Weight	20 g