53
use and maintenance Scarabeo 50 2T - Scarabeo 50 4T - Scarabeo 100 4T
CAUTION
Handle the plastic and painted
components with care to avoid scraping
or damaging them.
u Remove front handlebar cover (5) and
pay special attention not to damage the
tabs.
NOTE When reassembling verify that
tabs are fitted correctly.
REMOVING
FRONT INSPECTION COVER
Carefully read page 40
(MAINTENANCE).
CAUTION
Handle painted parts with care; do not
scratch or damage them.
u Place the vehicle on the centre stand on
firm and level ground.
u H Unscrew and remove the screw (6).
u Remove the inspection cover (7).
REMOVING THE EXHAUST
SILENCER
Carefully read page 40
(MAINTENANCE).
u Place the vehicle on the centre stand on
firm and level ground.
WARNING
Before carrying out the following
operations, let the engine and the
silencer cool down until they reach
room temperature, in order to avoid
burns.
5
4
3
7
6
1
3
Scarabeo_502T_50-100 4T_gb.book Page 53 Tuesday, July 26, 2005 5:10 PM