Asus P8P67 WS Revolution User Manual

ASUS P8P67 WS Revolution 4-13
4.3.6 Probe II
Probe II is a utility that monitors the computer’s vital components, and detects and
alerts you of any problem with these components. Probe II senses fan rotations,
CPU temperature, and system voltages, among others. With this utility, you are
assured that your computer is always at a healthy operating condition.
Launching Probe II
After installing AI Suite II from the motherboard support DVD, launch Probe II by
clicking Tool > Probe II on the AI Suite II main menu bar.
Loads the
default threshold
values for each
sensor
Applies your
changes
Loads
your saved

Saves your


Click the Voltage/Temperature/Fan Speed tabs to activate the sensors or to
adjust the sensor threshold values. The Preference tab allows you to customize
the time interval of sensor alerts, or change the temperature unit.
Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.

Asus P8P67 WS Revolution Specifications

General

Chipset	Intel P67
CPU Socket	LGA 1155
Form Factor	ATX
Audio	Realtek ALC892 8-Channel High Definition Audio CODEC
RAID Support	RAID 0, 1, 5, 10
Memory Support	4 x DIMM, Max. 32GB
Memory Standard	DDR3 2200(O.C.)/2133(O.C.)/1866(O.C.)/1600/1333/1066 MHz
Storage	4 x SATA 3Gb/s
USB Ports	12 x USB 2.0 (6 at back panel, 6 by internal headers), 2 x USB 3.0 (at back panel)
Networking	Dual Gigabit LAN