Asus P8P67 WS Revolution User Manual

3-18 Chapter 3: BIOS setup
 
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Enabled/Disabled the High Precision
Event Timer.
Back Advanced\ PCH Configuration >
EFI BIOS Utility - Advanced Mode
PCH Chipset Configuration
High Precision Timer Enabled
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Enabled] [Disabled]
 
While entering Setup, the BIOS automatically detects the presence of SATA devices.
The SATA Port items show Not Present if no SATA device is installed to the
corresponding SATA port.
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
(1) IDE Mode. (2) AHCI Mode. (3)
RAID Mode.
Back Advanced\ SATA Configuration >
EFI BIOS Utility - Advanced Mode
SATA Configuration
SATA Mode AHCI Mode
S.M.A.R.T. Status Check Enabled
SATA6G_1 (Gray) Not Present
Hot Plug Disabled
SATA6G_2 (Gray) Not Present
Hot Plug Disabled
SATA3G_3 (Blue) ASUS CB-521 ATAPI
Hot Plug Disabled
SATA3G_4 (Blue) Not Present
Hot Plug Disabled
SATA3G_5 (Blue) Not Present
Hot Plug Disabled
SATA3G_6 (Blue) Not Present
Scroll down to display the following items:
Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc.
Hot Plug Disabled
Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc.

Asus P8P67 WS Revolution Specifications

General

Chipset	Intel P67
CPU Socket	LGA 1155
Form Factor	ATX
Audio	Realtek ALC892 8-Channel High Definition Audio CODEC
RAID Support	RAID 0, 1, 5, 10
Memory Support	4 x DIMM, Max. 32GB
Memory Standard	DDR3 2200(O.C.)/2133(O.C.)/1866(O.C.)/1600/1333/1066 MHz
Storage	4 x SATA 3Gb/s
USB Ports	12 x USB 2.0 (6 at back panel, 6 by internal headers), 2 x USB 3.0 (at back panel)
Networking	Dual Gigabit LAN