Autronica BS-430 User Manual

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 119
Step Actions to be taken Display Indication
Comments: If the event log consists of one page or less, the
READ FORWARD / BACKWARD buttons will
reverse the order of the events.
You can also scroll up and down with the arrow
buttons (6 and 9).
6
To return to the LOG menu, press the
Close Window button
14.4.4 The Log Setup Menu
The submenu Log Setup includes the menu selections Read
Parameter, Read Filter and Clear Log.
In this menu you can determine how the information is to be presented
when you enter menu selections 1-8 in the LOG menu. You can, for
example, setup the LOG menu so that only Fire Alarms from a specific
date/time will be shown when you enter LOG FIRE ALARMS (menu
selection 1 in the LOG menu).
Read Parameters
This menu selection allows you to determine the read parameters:
 Read mode, including; Most recent, Continue, From time
 From Date and Time
 Read Direction (forward/backwards)
 Number of Entries
Read Filter
This menu selection allows you to determine the units that are to be
logged (for example, Points, FAD, Loop units etc.).
Note that when leaving the Control Menu, Read Parameters and Read
Filter are reset to default values.
Clear Log
This menu selection allows you to clear the entire Log Menu for all
events previously recorded.
SERVICE
1 FIRE ALARMS
2 PREALARMS
3 EARLY WARNINGS
4 FAULTS
5 DISABLE/ENABLE
6 USER OPERATIONS
7 TESTS
8 ALL EVENTS
9 LOG SETUP
19:23
LOG

Autronica BS-430 Specifications

General

Brand	Autronica
Model	BS-430
Category	Fire Alarms
Language	English