Autronica BS-430 User Manual

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 142
14.10 Oil & Gas Commands
The “Oil & Gas Commands” are specifically related to the Oil & Gas
Market.
14.10.1 Inhibit Point
This menu allows you to inhibit points. When one or several points are
inhibited, the point(s) will not signal alarm to outputs. An inhibited point
will however present an alarm, prealarm and early warning on all
panels and AutroCom as usual. This includes panel buzzer, panel
LEDs and panel LCD display.
It is only possible to inhibit a unit from the panel menu or via
AutroCom.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SERVICE, press 5.
3
To select OIL & GAS COMMANDS, press 8.
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5 SERVICE
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS

Autronica BS-430 Specifications

General

Brand	Autronica
Model	BS-430
Category	Fire Alarms
Language	English