Autronica BS-430 User Manual

Service Commands
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 124
Loop Commands
Disable Loop
Enable Loop
14.5 Loop Commands
14.5.1 Disable Loop
This menu allows you to disable one loop at a time without interrupting
the system. This can be useful during maintenance, when detectors
are changed on the loop etc.
Note that only points "remember" their original Enable / Disable state.
Step Actions to be taken Display Indication
1
To enter the Main Menu, press the Menu button
2
To select SERVICE, press 5.
3
To select LOOP COMMANDS, press 3.
4
To select DISABLE LOOP, press 1.
5
Use the keyboard to enter text into the input box
-
MENU
19:23
Total: 3
1 SHOW STATUS
2 DISABLE
3 ENABLE
4 SYSTEM
5
SERVICE
SERVICE
19:23
1 TEST
2 LOG
3 LOOP COMMANDS
4 REPORT
5 UPGRADE
6 REMOTE ACCESS
7 DUAL SAFETY
8 OIL & GAS COMMANDS
SERVICE
19:23
LOOP COMMANDS
1 DISABLE LOOP
2 ENABLE LOOP
SERVICE
19:23
BSB 310
BSJ 310
BSL 310
DISABLE LOOP

Autronica BS-430 Specifications

General

Brand	Autronica
Model	BS-430
Category	Fire Alarms
Language	English