Autronica BS-430 User Manual

Appendix
Operator's Handbook, AutroSafe Interactive Fire Detection System, Release 4, 116-P-ASAFE-OPERATE/FGB Rev.G, 2016-02-19,
Autronica Fire and Security AS
Page 154
15.2.5 Configuration Example
An example of a typical configuration would be as follows:
 Each single room with one or several detectors is defined as a
Detection Zone, DZ1, DZ2, etc.
 Each corridor and stairway is defined as a Detection Zone.
 Two main sections on each floor, divided by a fire wall, are each
defined as an Alarm Zone, AZ1 and AZ2. These alarm zones are
also defined as neighbour alarm zones.
 The entire building, controlled and monitored by a Fire Alarm
Control Panel (operator panel), is defined as an Operation Zone,
OZ.

Autronica BS-430 Specifications

General

Brand	Autronica
Model	BS-430
Category	Fire Alarms
Language	English