Axon Fleet 2 Installation Manual

Axon Fleet 2 Installation Manual
Axon Enterprise, Inc. Page 20 of 39
Tools
The following is a list of required and recommended tools to install the Axon Fleet 2 camera
system.
Required Tools
• Multi-meter to test for voltage
• #1 Phillips screwdriver
• Mini screwdriver set or multi-bit mini set with
mini ratcheting screwdriver
• Power drill/ impact driver set
• Mini ratchet/ socket
• Wire cutters and crimper (Klein Tools
products are recommended)
• Wire strippers
• Small right-angle bit driver set
• Allen wrench set (metric and standard)
• Paper Towels
• Cable ties
• 3M Electrical tape
• 3M Double-sided tape
• 3M Adhesive promoter wipes
• Metal or nylon fishing tape for running wires
through channels
• Multi-end crimp set for various terminations
of connections (if crimping is chosen method)
• Hole Saws and arbors - Ensure a 7/8″ hole
saw (22 mm) for the antenna
• #31 or 3mm drill bit to pre-drill rear camera
mount holes.
Highly Recommended Tools
• Battery powered, handheld flashlight
• Nut driver set
• Small/short box wrench set
• Antenna bit
• Knee pads

Axon Fleet 2 Specifications

General

Brand	Axon
Model	Fleet 2
Category	Car Video System
Language	English