10.2.14 Setting a temporary heating flow temperature
1. From the control panel main screen, turn the button to increase or
reduce the temperature value.
2. Confirm the menu selection by pressing the button.
10.2.15 Managing boilers in cascade
Boilers in cascade are controlled and managed by the master boiler.
1. Set the following parameters on the master boiler:
Tab.64 Configuration of the master boiler in a cascade
Parameter num
ber
Parameter Description Setting
3540 Auto source seq ch'over Operating time before the auto
matic change of the master boiler
sequence.
Number of hours
3541 Auto source seq exclusion Exclusion of the boiler or boilers
from the periodic sequence rota
tion.
First
First and last
Last
None
10.3 Accessing the information menu
1. Go to the parameters menu by pressing the
key.
2. Select the Information menu with the rotary button .
3. Confirm by pressing the rotary button .
4. Use the rotary button to scroll through the various items of
information.
Fig.139
To Next Page
Loading...
Need help?
General