10.2.10 Using the fixed-speed boiler
Using the boiler according to heat input makes it possible to calibrate the
gas valve.
The heat input is the speed of the boiler in percentage of the nominal
output.
1. From the home screen, press the and
keys simultaneously.
2. Select the parameter Controller stop function by turning the
button.
3. Press the button to confirm.
The parameter Controller stop function On appears.
4. Press the button to confirm.
304:Controller stop appears.
5. Press the button to modify the heat input value from 0 to 100 % by
turning the
button.
6. Press the button to confirm the heat input.
Important
Press the
key to return to the main display and reactivate the
control system.
10.2.11
Selecting a heating circuit
The control panel can manage up to three different heating circuits.
1. From the home screen, turn the button to select one of the three
heating circuits available.
2. Press the button to confirm.
3. Turn the button to temporarily modify the temperature set point on
the selected heating circuit.
4. Press the button to confirm.
The selected heating circuit is active.
Fig.114
MW-3000085-EN-02
MENU
14:13
1.5 ba
MW-3000088-EN-02
MENU
Controller sto
MW-3000089-EN-02
MENU
80%Ad
7702630 - v02 - 11082018 POWER HT + 95
To Next Page
Loading...
Need help?
General