7
Table 4, Network Settings
IP Address Identifies the IP address assigned to the appliance.
Netmask Identifies the subnetwork subdivision of an IP net-
work.
Gateway Identifies the address, or route, for the default gate-
way.
VLAN ID Identifies the Vi
rtual Local Area Network (VLAN) for
this appliance. Values range from 0 to 4094.
VLAN Priority Identifies the priority of the network traffic on the
VL
AN. Priority can range from 0 through 7.
NTP Server Identifies the IP address or the domain name of the
Ne
twork Time Protocol (NTP) Server.
Note: This field is only editable when Standalone
Op
eration is enabled.
TFTP Server Identifies the host name or IP address of the Tr
ivial
File Transfer Protocol (TFTP) server.
The specified TFTP server can be used to automati-
cally set this device’s Configuration settings via the
Get Configuration from Server button.
If TFTP Server from DHCP (see below) is set to “Yes”,
th
is value will be auto-configured via DHCP option
66, assuming the DHCP server has been configured
to provide option 66. For details, see the documenta
-
tion for your DHCP server.
Note: A TFTP server runs on the Nyquist server on
p
o
rt 69 (the standard TFTP port) and the optional
Nyquist DHCP service automatically provides this
T
F
TP address via option 66.
Note: If this value is unspecified, the TFTP Server
fr
om DHCP will automatically be set to “Yes”, this
fi
eld will become read-only, and DHCP will be used to
configure this setting. To change this value, the
TFTP
Se
rver from DHCP setting must be set to No, which
ma
kes the field editable.
Note: This setting is not available when Standalone
Op
eration is enabled.
To Next Page
Loading...
Need help?
General
