Access Easy Controller 2.1 Table of contents | en 5
Robert Bosch (SEA) Pte Ltd Hardware Installation Manual 2018.11 | 1.0.6 | F.01U.122.796
16.2 Before Starting the Update 96
16.3 Recovering Controller Database from a Windows Computer 96
17
Entry and Arm/Disarm Reader 98
17.1 Wiring diagram of a HID Compliant Entry and Arm/Disarm Reader 100
18
Appendix A How to Install & Set the TCP/IP Address on a PC 101
19
Appendix B Modem Setup 105
19.1 Preparing the WAVECOM GSM Modem for AEC2.1 105
19.2 How to Test the GSM Modem 106
20
Appendix C Detailed Wiring 108
21
Appendix D Selecting A Correct Battery Size 111
21.1 Battery Specification for Access Easy Controller 2.1 111
22
Appendix E Troubleshooting 114
22.1 Login Problems 114
22.2 Network Connectivity Problems 115
23
Appendix F Frequently Asked Questions 120
23.1 General Questions 120
23.2 Controller Questions 122
23.3 Reader and Door Questions 123
23.4 Inputs and Outputs 125
23.5 Network Question 125
24
Appendix G Blank Configuration Form 127
25
Appendix H Resetting to Factory Default 130
25.1 Resetting to Factory Default 131
25.2 Resetting IP Address to Default IP Address 132
26
Appendix I Ports Used by AEC2.1 and AEMC 133
To Next Page
Loading...
Need help?
General
