Control Panels B94x/B93x Settings menu | en
103
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
18.2 Date/Time
Your security system must have the correct time and date for scheduled
events to occur at the correct times. Use the Date/Time function to set
both the time and date. The security system uses a 12-hour AM/PM
format or a 24 hour format (select in the Date format menu option).
If your security system is configured for automatic date/time updates,
the update might overwrite your changes.
Setting the date and time:
1. Open the Main Menu.
2. Press Settings to open the menu.
3. Press Date/Time to open the menu.
4. Press Set Date to open the menu.
5. Enter your passcode and press ENTER.
6. Enter the new date in the selected format.
7. Press Save/ENTER to save the change. The keypad shows Date
change complete and then returns to the previous menu.
8. Press Set Time to open the menu.
9. Press Set.
10. Enter the new time in the selected format.
11. For B93x keypads in 12 hour format, press AM or PM.
12. Press Save/ENTER to save the change. The keypad shows Time
change complete and then returns to the previous menu.
13. Escape from the menu.
To Next Page
Loading...
Need help?
General
