Control Panels Glossary | en
217
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
Glossary
All On
To turn on (arm) both
interior points and
perimeter points.
bypass
Selectively remove points
from the security system.
A point may be bypassed
in order to arm the
perimeter with a window
open.
closing window
A duration of time
programmed by your
security company. Your
security company can
program the system to
turn on at the end of the
window.
entry delay
A programmed delay of
system alarm response
allowing an individual to
enter an armed area
through the correct point
and disarm the area. If not
disarmed before the delay
time expires, the system
begins an alarm response
which may include reports
to the central station.
exit delay
A programmed delay of
system alarm response
allowing exit after arming
an area. Failure to exit
before the delay time
expires, causes entry
delay to begin. The system
must then be disarmed. If
not disarmed before the
delay time expires, the
system begins an alarm
response which may
include reports to the
central station.
faulted point
A point that is not normal
(a door or window is
open).
To Next Page
Loading...
Need help?
General
