104
en | B94x/B93x Settings menu Control Panels
2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
18.3 Schedule (SKEDs)
A SKED is a function programmed to be performed automatically at a
scheduled time by your security system. You can change the scheduled
time for SKEDs, disable a SKED to prevent it from automatically
happening, or restart a previously disabled SKED. Contact your security
company to determine what SKEDs they programmed for your system.
Selecting a SKED to change:
1. Open the Main Menu.
2. Press Settings to open the menu.
3. Press Schedule to open the menu.
4. Enter your passcode and pressENTER.
5. Use /PREV or /NEXT to scroll through the list of SKEDs. The
keypad indicates whether a SKED is enabled, disabled, or not yet
programmed.
6. Continue to Enabling a disabled SKED or Disabling a enabled SKED.
To Next Page
Loading...
Need help?
General
