Control Panels B92x/B91x On/Off menu | en
145
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
24.5 Bypass menu
Use the Bypass menu to temporarily take points out of the security
system, and enter them back into the system. Bypassed points do not
create alarm or trouble events, do not detect intruders, and cannot
send any reports. For example, to leave a window open and turn the
system on, you bypass the window point and then turn the system on.
24.5.1 Bypass
You can bypass points when an area is turned off (disarmed). Points
remain bypassed until you unbypass them or some points return when
the area is turned off (disarmed). Use point bypassing with discretion:
bypassing a point reduces the level of security.
Bypassing a point:
1. Open the Main Menu.
2. Press [1] or ENTER to open the On/Off menu.
3. Use NEXT to go to the Bypass menu, and press ENTER, or simply
press [5].
4. Press [1] or ENTER to open the Bypass Points menu.
5. Select a point to bypass.
6. Press ESC to exit the menu.
To Next Page
Loading...
Need help?
General
