Control Panels Alarm events | en
23
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
If the gas point is still in alarm (faulted) then the point goes to trouble
after silencing. Some gas points need to be reset. You cannot clear gas
troubles from the display. When gas points return to normal (trouble
conditions are corrected), the security system automatically clears the
gas trouble from the display.
7.4 User and burglary alarms
User alarms have the third priority. User alarms are user initiated alarms
that include hold-up, panic, and medical alarms, for example. Medical
alarms are not available on UL listed systems. A steady tone sounds for
the time set by your security company.
Burglary alarms are the forth priority. When a burglary point activates
while the system is on (armed), the keypad emits a steady burglary
tone.
Ensure that all occupants know the difference between the steady user
or burglary tone, the pulsating gas tone, and the pulsating fire tone. The
tone sounds for the time set by your security company.
7.4.1 Silence user and burglar alarms
The audible alarm sounds for a specific period of time before it
automatically shuts off. To silence user and burglary alarms before the
time expires, simply enter your personal passcode and press ENTER.
Notice!
For silent alarms, such as hold up alarms, no audible alarm
sounds.
To Next Page
Loading...
Need help?
General
