Control Panels B92x/B91x On/Off menu | en
143
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
24.4 Extend Closing
Your security company might program your system to expect you to turn
on (arm) within a closing window. A closing window is a duration of
time programmed by your security company. Your security company
sets a fixed length of time for the closing window. Additionally, your
security company might program your system to automatically turn on
(arm) at the end of the window.
Use the Extend Close Time option when you need to stay later than the
scheduled close time. If you do not extend the Close Time and do not
turn the system on before the scheduled time, the system creates a
Late to Close event.
At the beginning of the closing window, the keypad beeps and shows
Please Close Now to remind you to turn on (arm) your system. It
remains in the display until you turn on the system, the close window
ends, or you extend closing. Alarm or trouble messages replace this
message in the event of an alarm or trouble condition. If the alarm or
trouble condition clears before the end of the close window Please
Close Now returns to the keypad display.
Pressing ESC silences the beep and clears the message for 10 minutes.
If you have not turned your system on (armed) or extended closing, the
Please Close Now message and beep reappear after 10 minutes. To
extend the window, enter the new time at which you would like the
reminder tone to begin. This time is the new beginning of the closing
window.
When you hear the warning, you can:
To Next Page
Loading...
Need help?
General
