202
en | Options Control Panels
2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
32.2 Early Ambush
When the Early ambush feature is enabled, the security system, requires
two passcodes to turn off the area. Entering the first passcode turns
the area off and begins counting down Early Ambush Time (__ minutes).
A user must enter the second passcode before Early Ambush time
expires. Early Ambush is disabled for SIA compliant systems.
If Early Ambush time expires before a user enters the second passcode,
the system reports to your security company that the system was
disarmed under duress.
You can enter the first passcode a second time as the second passcode.
You can enter the passcodes at the same keypad, or at different
keypads (if keypads are assigned to the same area).
Early Ambush is:
enabled on my system.
disabled on my system.
To Next Page
Loading...
Need help?
General
