Control Panels B94x/B93x On/Off menu | en
55
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
14.2 Part On menu
Use the Part On menu to turn areas Part On. Turning an area Part On
means to turn on only some of the points, and thus part of the system.
For example, your security company might configure your system so
that when you use the Part On function, only the exterior doors and
windows turn on, whereas interior motion sensors do not turn on.
14.2.1 Part On
Turning an area Part On turns on some points, or part of the system, in
the area and provides entry and exit delay. For example, you can turn
on the area and leave through a door (within exit delay time) without
creating an alarm event.
Turning the perimeter on with an exit delay:
1. Open the Main Menu.
2. Press On/Off to open the menu.
3. Press Part On to open the menu.
4. Press Part On Delay to open the menu.
5. Enter your passcode and press ENTER. The keypad shows Part On
Delay.
To Next Page
Loading...
Need help?
General
