Control Panels Warning displays and tones | en
17
Bosch Security Systems B.V. 2019.06 | 07 | F.01U.307.371
Your security company programmed the entry delay times for you:
My entry delay time is: _______________________________
5.4 Exit delay tone and display
When you first turn on (arm) your system (using your keypad or keyfob),
the keypad emits the exit delay tone, shows Exit Now!, and counts down
the exit delay time. The tone pulsing rate increases during the last 10
sec of exit time.
If you exit and re-enter before exit time expires, the exit delay timer
restarts the countdown. The restart only applies once.
Your security company programmed the exit delay times for you:
My exit delay time is: _______________________________
5.5 Keypress tones
The keypad sounds the keypress tone (a short beep) when you press
any key. Use the Settings menu to enable/disable the keypress tone.
5.5.1 Invalid entry (error tone)
The invalid entry tone follows the keypress tone when the keypress
completes an invalid entry.
Some entries require one keypress. Other entries require a series of
two or more keypresses.
To Next Page
Loading...
Need help?
General
