Brother BAS-605 Series User Manual

Iii) Adjusting the bobbin thread knife assembly
(1) Adjusting the bobbin thread knife left-right position
X
X
When the bobbin thread knives @ are in the two knife holes of the needle plate 0, move the cylinder rod
@left or right manually. The cylinder rod@ should move smoothly.
*If the cylinder rod @ movement is stiff, the knives @ may be twisted because only the tops of the knives
@ are in the needle plate knife holes.
(Adjustment)
1. Loosen the bolt 0 in knife holder (L) 0.
2. Move knife holder (L) 0 and the cylinder rod @ left or right. Tighten the bolt @ at the position where
the cylinder rod@ moves easily.
*There is usually no need to loosen the bolt$ in knife holder (R) (i}. However, if the right knife is not
positioned properly or if the cylinder rod movement is stiff, loosen the bolt f) in knife holder (R) (i},
and adjust the position of knife holder (R) (i} while moving the cylinder rod @. Then tighten the bolt
8 at the position where the cylinder rod @ moves easily.
-55-
MODEL No. BAS-605, 610 SERIES
From the library of: Superior Sewing Machine & Supply LLC

Brother BAS-605 Series Specifications

General

Brand	Brother
Model	BAS-605 Series
Category	Sewing Machine
Language	English