Brother BAS-605 Series User Manual

Ill Adjusting the pickup stacker
(1) Adjusting the stacker table position
1. Stacker table 0 height
There are six vertical adjustment positions for the stacker table depending upon the installation
position of the cloth stock arm 8.
Raise the arm to reduce the stock number; lower the arm to increase the number.
2. Stacker table 0 angle
The stacker table can be adjusted to one of seven angles depending upon the hole in the stacker table
0 into which the table supporter bar@) is inserted.
*When the above stacker table 0 height and angle adjustments have been completed, move the
stacker arm e in the direction of normal operation by hand to make sure the arm does not strike the
stacker table 0. If the arm strikes the table, readjust the angle and height.
-67-
MODEL No. BAS-605, 610 SERIES
From the library of: Superior Sewing Machine & Supply LLC

Brother BAS-605 Series Specifications

General

Brand	Brother
Model	BAS-605 Series
Category	Sewing Machine
Language	English