Brother BAS-605 Series User Manual

~ Specification comparative table
--------
BAS-605 • 606 BAS-610 • 611 • 612
Seam length
28-190 mm (1.0 mm interval)
Sewing reference position
Front, center, rear
(BAS-610, 611, or 612 is available with PROM whose number is 61-M1 or later.)
Motor speed 2200 · 2500spm
Lockstitch pitch
1.8-3.2 mm (0.2 mm interval)
V backtacki ng
Backtacking
N backtacking
Condensed stitching
Backtacki ng pitch
Condensed
0.4- 1.0 mm (0.2 mm interval)
V and N backtacking
0.8- 2.0 mm (0.4 mm interval)
Backtacking
length
3.0-6.0 mm (1.0 mm interval)
Feed speed without material
15 or 20m/min
Standard foot switch
Twin pedal
Five steps
Foot switch operation
Timer
Manual,
timer
Gauge
8-20 mm {2 mm interval)
Needle thread breakage detector
Equipped
Sewing resumption
function
Available
Stacker setting
DIP switch
Panel switch
Corner knife setting
DIP switch
Panel switch
Center knife correction function
Available
Corner knife setting Panel switch (button)
Panel switch
Corner knife correction function Available
Program
number
1 5
Cycle program
Not available
Available
Bobbin thread counter
1 3
Production counter
Not available Available
Carriage feed timer
Available (SELECT switch)
Carriage feed operation order
Available (THREAD TRIMMER switch) Available (Pedal)
Foot switch and timer setting Available (SET switch)
Flap sewing
Front and rear edge detector
(BAS-610, 611,or 612 isavailablewith PROM whose number is 61-M1 or later.)
-3-
MODEL No. BAS-605, 610 SERIES
From the library of: Superior Sewing Machine & Supply LLC

Brother BAS-605 Series Specifications

General

Brand	Brother
Model	BAS-605 Series
Category	Sewing Machine
Language	English