Brother BAS-605 Series User Manual

(3) Replacing the bobbin thread knives
MODE
D ·l·l•ll•l!!·sla
Ji . l!i!·llllft1.
• PROGRAM
• KNfE CHAI«iE
&CYCLE PGM.
4~
CARRIAGE
FEED
1. Set the MODE switch 0 to MANUAL.
2. Set the CARRIAGE FEED switch @to FORWARD.
The carriage feed will advance.
3. Set the power switch @) to OFF.
4. Remove slide plates (R) and (L) 0.
5. Tilt the machine head until it stops.
6. Loosen the two screws @, and remove the screws
C9, and the knife base fl .
* Attachment is the reverse of removal.
Cautions on attachment
1. Make sure that the bobbin thread knives @) do
not extend above the needle plate top.
2. When the cylinder rod is fully retracted, the
grooves in the bobbin thread knives @) should be
aligned
with the grooves in the needle plate.
THREAD
TRIMMER
-57-
MODEL No. BAS-605, 610 SERIES
From the library of: Superior Sewing Machine & Supply LLC

Brother BAS-605 Series Specifications

General

Brand	Brother
Model	BAS-605 Series
Category	Sewing Machine
Language	English