Home > Fax > Send a Fax > Set the Fax Logic (Sending and Receiving Sequence)
Set the Fax Logic (Sending and Receiving Sequence)
You can change the process of manual fax send or receive.
If you often send or receive a fax manually to/from the other party at the end of a conversation, set the [Fax
Mode] to [Easy Mode].
If you set to [Easy Mode]: You can send or receive a fax manually just simply press [Fax Start]. If you are
a caller, press [Fax Start] to send a fax. If you are a receiver, press [Fax Start] to receive a fax.
If you set to [Advanced Mode]: No matter you are a caller or receiver, you can select you will send or receive a
fax manually. When you press [Fax Start], the machine will ask you: [Send/Receive?]. If you want to
send a fax, select [Send]. If you want to receive a fax, select [Receive].
Even if you set either [Easy Mode] or [Advanced Mode] and if there is a document in the ADF, the
document in the ADF will be sent by pressing [Fax Start].
1. Press [Settings] > [All Settings] > [Fax] > [Miscellaneous] > [Fax Mode].
2. Press [Easy Mode] or [Advanced Mode].
3. Press
.
Related Information
• Send a Fax
222
To Next Page
Loading...
Need help?
General
