Home > Network > Technical Information for Advanced Users > Reset the Network Settings to the Factory
Settings
Reset the Network Settings to the Factory Settings
You can use your machine's control panel to reset the print server to its default factory settings. This resets all
information, such as the password and IP address.
• You can also reset the print server to its factory settings using BRAdmin Light, BRAdmin Professional 3,
or Web Based Management.
1. Press [ ] [Settings] > [All Settings] > [Network] > [Network Reset].
2. [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.]
appears. Press [OK] for two seconds to confirm.
The machine will restart.
Related Information
• Technical Information for Advanced Users
335
To Next Page
Loading...
Need help?
General
