4-16
Confidential
6 IF YOU REPLACE THE PAPER FEEDING RELATED PARTS AND
MAINTENANCE UNIT
The paper feeding related parts to be adjusted after replacement are listed below.
- Paper feed roller - Registration sensor PCB
- Paper ejection roller - Carriage PCB ASSY
- Switchback roller - Platen
- Carriage motor - Flushing box
- Paper feed motor - Flushing base
- CR encoder strip - Maintenance unit
- PF encoder disk - Paper feed arm frame ASSY
- PF encoder sensor PCB - LT frame ASSY
- CR timing belt
<Operations>
6.1 Check head nozzles (Maintenance mode 09)
6.2 Adjustment of software correction for inclination/corrugation/ruled lines
(Maintenance mode 65 / User menu)
6.3 Updating of paper feeding correction values (Maintenance mode 58 / User menu)
6.4 Adjustment of margins in borderless printing (Maintenance mode 66)
6.5 < Only when replacing the Paper feed arm frame ASSY or LT frame ASSY of the
paper remaining sensor model > Disable inter-machine variation calibration for
paper remaining sensor (Maintenance mode 88 <Selector 1 on AMS04>)
6.6 Check printing
<Requirements>
(1) USB cable (one piece)
(2) PC (Windows
®
XP or later)
Create a temporary folder in the C drive.
(3) Download utility (FILEDG32.EXE)
Make a copy of the download utility in the temporary folder in the C drive.
(4) Maintenance driver (MaintenanceDriver.zip), if not installed
Make a copy of the maintenance driver in the temporary folder in the C drive.
Extract the copied file and install it, referring to APPENDIX 3 "INSTALLING THE
MAINTENANCE PRINTER DRIVER."
(5) USB flash memory
(6) Data files of print patterns
To Next Page
Loading...
General
Weight and Dimensions
