B - 1 APPENDIX B
B
On-screen programming
Your MFC is designed to be easy to use with LCD on-screen
programming using the navigation keys. User-friendly programming
helps you take full advantage of all the menu selections your MFC
has to offer.
Since your programming is done on the LCD, we have created
step-by-step on-screen instructions to help you program your MFC.
All you need to do is follow the instructions as they guide you through
the menu selections and programming options.
Menu table
You can probably program your MFC without the User’s Guide if you
use the Menu table that begins on page B-3. These pages will help
you understand the menu selections and options that are found in the
MFC’s programs.
Memory storage
If there is a power failure, you will not lose your menu settings
because they are stored permanently. Temporary settings (such as
Contrast, Overseas Mode, and so on) will be lost. You may also have
to reset the date and time.
Appendix B
You can program your MFC by pressing
Menu/Set
, followed by
the menu numbers.
For example to set
Fax Resolution
to
Fine
:
Press
Menu/Set
,
2
,
2
,
2
and
▲
or
▼
to select
Fine
.
Press
Menu/Set
.
To Next Page
Loading...
Need help?
General
