SETUP SEND 3 - 2
Speed-Dialling
Press
Search/Speed Dial
,
#
, and then the two digit Speed-Dial
number. (See
Storing Speed-Dial numbers
on page 5-1.)
Search
You can search for names you have stored in the Speed-Dial
memories. Press
Search/Speed Dial
and the navigation keys to
search. (See
Storing Speed-Dial numbers
on page 5-1.)
* To search alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.
Fax Redial
If you are sending a fax manually and the line is busy, press
Redial/Pause
, and then press
Mono Start
or
Colour Start
to try
again. If you want to make a second call to the last number dialled,
you can save time by pressing
Redial/Pause
and
Mono Start
or
Colour Start
.
Redial/Pause
only works if you dialled from the control panel.
If you are sending a fax automatically
and the line is busy, the MFC
will automatically redial up to three times at five minutes intervals.
If the LCD shows
Not Registered
when you enter the
Speed-Dial number, a number has not been stored for it.
two-digit number
To search alphabetically*
To search numerically
or
To Next Page
Loading...
Need help?
General
