SETUP RECEIVE 4 - 6
Reception into memory
(Not available for colour fax reception)
As soon as the paper tray becomes empty during fax reception, the
screen will display
No Paper Fed
; please put some paper in the
paper tray. (See
How to load paper, envelopes and post cards
on
page 1-15.)
If the
Memory Receive
is
On
at this time...
The current fax reception will continue, with the remaining page(s)
being stored in memory, subject to available memory. Subsequent
incoming faxes will also be stored into memory until the memory is
full, following this no further incoming fax calls will be automatically
answered. To print all data put fresh paper in the paper tray and
press
Mono Start
or
Colour Start
.
If the
Memory Receive
is
Off
at this time...
The current fax reception will continue, with the remaining page(s)
being stored in memory, subject to available memory. Subsequent
incoming fax calls will not be automatically answered until fresh
paper is put in the paper tray. To print the last fax received, put paper
in the paper tray and press
Mono Start
or
Colour Start
.
1
If it is not illuminated in green, press (
Fax
).
2
Press
Menu/Set
,
2
,
1
,
6
.
3
Use
▲
or
▼
to select
On
(or
Off
).
Press
Menu/Set
.
4
Press
Stop/Exit
.
To Next Page
Loading...
Need help?
General
