Brother MFC MFC-5440CN User Manual

GETTING STARTED 2 - 1
2
Initial Setup
Setting the Date and Time
When the MFC is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your MFC will
be printed on every fax you send. If there is a power failure, you may
have to reset the date and time. No other settings will be affected.
1
Press
Menu/Set
,
0
,
2
.
2
Enter the last two digits of the year.
Press
Menu/Set
.
3
Enter two digits for the month.
Press
Menu/Set
.
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press
Menu/Set
. (For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press
Menu/Set
. (For example, enter 15:25 for 3:25 P.M.)
6
Press
Stop/Exit
.
The LCD now shows the date and time whenever the MFC is in
Fax mode.
Setting Tone or Pulse dialling mode
(Except for the Nordic Countries)
1
Press
Menu/Set
,
0
,
4
.
2
Press
▲
or
▼
to select
Pulse
(or
Tone
).
Press
Menu/Set
.
3
Press
Stop/Exit
.
Getting started
Initial Setup
2.Date/Time

Brother MFC MFC-5440CN Specifications

General

Brand	Brother
Model	MFC MFC-5440CN
Category	All in One Printer
Language	English